User Guide

9
COMPOUND BOW SETUP
REST SELECTION
There are two basic types of arrow rests “Shoot
Through” and “Shoot Around” (See fig 4) Shoot
through rests are designed for release shooters
as arrows shot using a release bend vertically.
Before putting your bow in a bow press, loosen
both the top and bottom weight adjustment bolts
5 to 7 turns from maximum weight (when limb
bolts are fastened all the way down). When put-
ting your bow in the press, never put pressure
on the riser! Always position the rollers at the
base of the limbs (where the limbs enter the limb
pockets). (See fig 3)
fig 3