User Guide

11
ers to crimp the nock set into place. NEVER
shoot a bow without a nock set or with a nock set
that has not been properly crimped. For proper
installation Hoyt USA recommends that this be
done by a qualified Pro Shop.
CABLE GUARD INSTALLATION
All aluminum Hoyt USAbows are designed with
a built in cable guard bar attachment. Before
mounting the cable guard bar, you must remove
the rubberbands used only for shipping purpos-
es. To insert the cable guard bar, simply slide the
bar through the two mounting holes on the riser
making sure that the bar is pushed completely
through and flush with the end of the front
Screws
Flush w/Front of Riser
fig 6
Nocking Point
Height
fig 5