Users Manual

28
Tilt Mode On:
Tilt the MEAZOR vertically to avoid obstacles in
order to measure the reference point of the wall
corners.
*Note: When the MEAZOR is tilted vertically, the
product should be tilted as slowly as possible. The
user should avoid the product being rotated. The
user can then move the turntable and tripod to
obtain the best possible measurement accuracy.
 Displacement Mode ：
When you are scanning a complex room with the
MEAZOR and the obstruction of the walls stops
the laser beam from measuring the full extent of
the room, you can turn on the Displacement
Mode to measure more space by moving
the MEAZOR around. Please read carefully the
steps for using this function.
1) Before the MEAZOR is displaced, identify the
reference point A and the reference point B.
2) Displace MEAZOR to a new position.
3) Confirm the new position of MEAZOR by
rotating the MEAZOR to reposition points A and B.
4) Continue to complete the scanning.