user manual

2-8 Options
◆ 1x/2x Mode
- specifies the mode to use (2, 4, 6 or 8 passes)
when the printer detects that one or two ink sets are loaded.
See “Variable Mode Printing” on page 3-2 for a description
of print modes.
◆ Quality Check Mode
- when enabled, AutoSet will report
when calibration fails. This is designed to work with Auto-
Tune scheduling (see “Media Feed Calibration” on page 4-
6). This can give the operator a chance to print anyway, or
cancel printing so the problem can be resolved. You can
select a mode to suit your quality requirements:
◆ OFF
- no quality check is performed, all jobs will print
regardless of whether AutoSet was successful.
◆ Attended Mode
- user must press
f
(Proceed) to
acknowledge the error and print the job (if one is pend-
ing), or
h
(Cancel) to cancel printing.
◆ Unattended Mode
- no user acknowledgment of errors
is required. When AutoSet fails, print jobs are sent to the
ColorSpan print server’s Attention queue with a disposi-
tion of “Uncalibrated Printer.”
◆ Camera Vision Mode -
enables improved calibration for soft
signage (textile) media by causing the camera to read the
larger calibration targets designed for these media. Select
Textured for soft signage, or Normal for graphics media.
When you reload media, this mode automatically resets to
Normal (graphics media) mode.
Restore All Defaults
Select this option to restore all variables under Settings and
Modes to their default values.
Upgrade
Select this option to upgrade the printer to support 12-head
printing. This upgrade is available for purchase from ColorSpan.
The printer software supplies an upgrade code number, which
you give to ColorSpan Technical Support in exchange for an
“upgrade key” number. When you enter the upgrade key num-
ber, the printer enables 12-head printing.