Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Installation Guide
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
1 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 1 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT Server 3.
1 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”. 11 With the “Intel 82557C-Based Ethernet PCI (10/100)” listed, click on “Finish”. 12 When asked to supply the driver “net82557.INF”, set the path to “A:\” and click on “OK”.
2 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 2 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT Server 4.0 system that supports NetBEUI, TCP/IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
2 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”. 11 With the “Intel 82557C-Based Ethernet PCI (10/100)” listed, click on “Finish”. 12 When asked to supply the driver “net82557.INF”, set the path to “A:\” and click on “OK”.
3 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 3 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Novell NetWare 3.12 Server Requirements • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 system that supports NetBEUI, TCP/IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
3 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”. 11 With the “Intel 82557C-Based Ethernet PCI (10/100)” listed, click on “Finish”. 12 When asked to supply the driver “net82557.
4 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 4 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Microsoft Windows 95 SR2.5 Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows 95 SR2.5. • Intel EtherExpress PRO 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 system that supports NetBEUI, TCP/IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
4 Installing the Intel EtherExpress PRO 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 When prompted, click on “Next” and then click on “Other Locations” to provide the drivers for the Intel EtherExpress PRO 100B-TX PCI 10/100. 10 Insert the drivers diskette and set the path statement to “A:\” and click on “OK”. 11 With the “Intel 82557C-Based Ethernet PCI (10/100)” listed, click on “Finish”. 12 When asked to supply the driver “net82557.
5 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation 5 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 4.0 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT 3.
5 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 9 Open the “Network Properties” window and agree to install “Windows NT Networking”. 10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 13 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”.
6 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation 6 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 4.0 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT 4.
6 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Open the “Network Properties” window and agree to install “Windows NT Networking”. 10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 13 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”.
7 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation 7 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Novell NetWare 3.12 Server Requirements • HP Vectra with Windows NT 4.0 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT 4.0 Workstation media. • Novell NetWare 3.
7 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 9 Open the “Network Properties” window and agree to install “Windows NT Networking”. 10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive.
8 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation 8 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT 4.0 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT 4.0 Workstation media. • Novell NetWare 4.
8 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Open the “Network Properties” window and agree to install “Windows NT Networking”. 10 With “Wired to the Network” checked, click on “Next”. 11 Click on the option to “Select from list” then on “Have Disk”. 12 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive.
9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation 9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 3.51 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT3.51 Workstation media. • Microsoft Windows NT 3.
9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button. 12 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box.
9 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 3.51 Server 27 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 28 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”. 29 With “Intel 82557-Based Ethernet PCI Adapter (10/100)” listed in the “Network Adapters:” windows, click on “Next”. 30 Accept the applicable network protocols and click on “Next”.
10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation 10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 3.51 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT3.51 Workstation media. • Microsoft Windows NT4.
10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button. 12 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box.
10 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 27 Insert the Intel EtherExpress Pro 100B-TX PCI Ethernet driver disk into the floppy drive. 28 Highlight the adapter labeled “Intel 82557-Based Ethernet PCI Adapter (10/100)” and click on “OK”. 29 With “Intel 82557-Based Ethernet PCI Adapter (10/100)” listed in the “Network Adapters:” windows, click on “Next”. 30 Accept the applicable network protocols and click on “Next”.
11 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation 11 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT 3.51 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT3.51 Workstation media. • Novell NetWare 4.
11 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button. 12 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” dialog box, and click on “Continue” in the second “Network Adapter Card Detection” dialog box.
11 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 31 At the “Network Services:” prompt, accept default settings and click on “Next”. 32 Finish the network card installation by clicking on “Next”. 33 Designate the path to your NT files and select “Continue”. 34 At the “PCI Configuration Notification” window, click on “OK”. 35 Click on “OK” for “Intel PROSet” dialog box. 36 Click on “Yes” to use DHCP or choose “NO” if you know your IP Address.
12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows for Workgroups Ver. 3.11 12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows for Workgroups Ver. 3.11 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 4.0 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT4.
12 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Windows NT 4.0 Server 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”. 12 Click “OK” to accept the default choice of “Unlisted or Updated Network Adapter”.
13 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows for Workgroups Ver. 3.11 13 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Microsoft Windows for Workgroups Ver. 3.11 Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT 4.0 Workstation. • Intel EtherExpress Pro 100B-TX PCI Ethernet card and drivers disk. • Microsoft Windows NT 4.0 Workstation media. • Novell NetWare 4.
13 Installing the Intel EtherExpress Pro 100B-TX PCI Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”. 12 Click “OK” to accept the default choice of “Unlisted or Updated Network Adapter”.