user manual

Removal and Installation

8-11

HP DesignJets 1050C and 1055CM Printers Service Manual

Vacuum Fan

Refer to Figure 6.

Removal

WARNING Switch off the printer and remove the power cord.

1. Remove the following:

1. "Right Hand Cover" see page 8-4.

2. "Service Station Assembly" see page 8-8.

2. Disconnect the vacuum fan cable from position P7 VACUUM FAN

on the electronics module.

3. Remove the four T-15 screws (item 1) securing the vacuum fan

assembly (item 2) to the right hand side chassis and remove the

assembly.

Figure 6: Vacuum Fan

C607421