hp pavilion v52 monitor guide
© 2003 Hewlett-Packard Company. All rights reserved. Hewlett-Packard is a registered trademark of Hewlett-Packard Company in the United States of America and other countries/regions. Other brand or product names are trademarks of their respective holders. The information in this document is subject to change without notice.
Contents Introduction Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Safety and Maintenance Guidelines Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Important Safety Information. . . . . . . . . . . . . . . . . . . . . . .
Contents Agency Regulatory Notices Federal Communications Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Declaration of Conformity for Products Marked with FCC Logo, United States Only . . . . . . . . . . . . . . . . . . . . . . . .
1 Introduction Your microprocessor-based, digitally controlled color monitor is a high-performance and easy-to-use product. It employs the latest on-screen menu technology.
Introduction 1–2 v52 Monitor Guide
2 Safety and Maintenance Guidelines Safety Guidelines Power Requirements Refer to the “Power Cord Set Requirements” section in “Agency Regulatory Notices,” for information on the correct power cord set for this device. Important Safety Information Å WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator.
Safety and Maintenance Guidelines Ä 2–2 ■ Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. ■ Install your monitor near an outlet that you can easily reach.
Safety and Maintenance Guidelines Removing the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of your monitor. 2. Lift the base up and away from your monitor.
Safety and Maintenance Guidelines 2–4 v52 Monitor Guide
3 Installation Monitor Base Installation On some monitors, the base must be attached prior to monitor installation. If you need to attach the base, follow these steps: 1. Align the hooks on the base with the sockets on the bottom of the monitor, and attach the base. 2. Push the base toward the front of the monitor until it stops.
Installation Monitor Installation Before installing your monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector. Ä CAUTION: To avoid damaging the video cable, ensure that the cable aligns with the 15-pin connector.
Installation Speaker Installation Selected monitors come with speakers that must be installed. If you need to install your speakers, follow these steps: 1. Place the control speaker 1 and the other speaker 2 on either side of your monitor. 2. Attach the speaker power cable 3 to the black connector on the back of the control speaker 1, and then connect the AC adapter 4 into an electrical wall outlet. 3. Attach the green connector 5 from the control speaker 1 to the green port on the back of your computer.
Installation 3–4 v52 Monitor Guide
4 Operation Information Files The CD-ROM included with this monitor contains two data files that must be installed onto your computer: An .INF file and an .ICM file. The .INF file designates software and defines monitor resources used by Microsoft Windows to ensure monitor compatibility with the graphics adapter in your computer. The .ICM file provides color matching consistency between your monitor screen and your printer.
Operation 3. Click the Settings tab. 4. Click Advanced Properties or Advanced, and select the Monitor tab. 5. Click Properties. 6. Click the Driver tab. 7. Click Update Driver and click Next. 8. Select the recommended option, and then click Next. 9. Select the Specify a Location box. 10. Find and open the hp_v52.inf file on the CD-ROM disc in the Drivers directory, and click OK. 11. Click Next to install the monitor driver.
Operation 7. Select the Monitor tab. 8. Click Properties. 9. Select the Driver tab. 10. Click Update Driver and click Next. 11. Select the recommended option, and then click Next. 12. Select the Specify a Location box. 13. Find and open the hp_v52.inf file on the CD-ROM disc in the Drivers directory, and click OK. 14. Click Next to install the monitor driver.
Operation On-Screen Display The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power button to turn on the monitor. 2. Press the Select button to display the On-Screen Display menu. A screen similar to this one appears. For a description of the icons that appear on the screen, see “On-Screen Display Functions” later in this chapter. ✎ Not all OSD features are available on all models.
Operation On-Screen Display Functions Use the Right-Adjustment and Left-Adjustment buttons found on the front control panel of your monitor to adjust these functions. ✎ The shaded area indicates that this function is available in the model indicated. On-Screen Display Icons and Functions Icon v52 Monitor Guide Function Description v52 Contrast Right-Adjustment increases the contrast, and Left-Adjustment decreases the contrast.
Operation On-Screen Display Icons and Functions (Continued) Icon Function Description Degauss This control demagnetizes the screen to reduce color impurities. v52 HP suggests you not degauss more than once within a 30-minute period of time. Color Temp Right-Adjustment selects the color temperature to the right and Left-Adjustment selects the color temperature to the left. Reset This control resets the monitor to factory default values. Exit This control exits the OSD menu.
Operation Out of Frequency Range Message If an Out of Frequency Range message is displayed on your monitor, your video resolution and/or refresh rate are set higher than the levels your monitor supports. To change the video resolution or refresh rate on your monitor, follow these steps: 1. Restart your computer. 2. Enter Safe Mode on your computer. Refer to your computer’s operating system Help for instructions on entering Safe Mode. 3.
Operation Using the Energy Saver Mode Your monitor is designed to meet strict Environmental Protection Agency (EPA) Energy Star requirements for reduced power consumption. Using a combination of hardware and software functions, this energy-saving feature allows your computer to control your monitor’s power consumption and reduce your monitor’s power state when not in use.
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch is off. Turn on power. Video cable is improperly connected. Connect video cable properly. Screen blanking utility is active. Depress any key on the keyboard or move the mouse. Image appears blurred, indistinct, or too dark.
Troubleshooting Problem Possible Cause Solution Image is not centered. Horizontal position may need adjustment. Press the SELECT button to access the On-Screen Display. Select H. Position to adjust as needed. Vertical position may need adjustment. Press the SELECT button to access the On-Screen Display. Select V. Position to adjust as needed. “No Signal” is displayed on screen. Monitor video cable is disconnected. Connect the 15-pin monitor video cable to the computer.
Troubleshooting Problem Possible Cause Solution No sound from left speaker. Speaker audio cable is disconnected. Make sure the speaker connection from the left-side speaker is connected to the rear of the right-side speaker. Left speaker balance may need to be adjusted. Select the Speaker icon located on your Windows desktop, and adjust the left-right balance accordingly. There is not enough air space to allow proper ventilation.
Troubleshooting A–4 v52 Monitor Guide
B Technical Specifications HP Pavilion v52/15" Monitor v52 Screen Size 15" (38 cm) visual diagonal Viewable screen size 13.8" (35 cm) Dot Pitch 0.
Technical Specifications v52 B–2 Operating Temperature 50° F to 95° F 10° C to 35° C Storage Temperature –22° F to 140° F –30° C to 60° C Humidity 20% to 80% (non-condensing) Altitude Up to 10,000 ft.
C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agency Regulatory Notices Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Hewlett-Packard Company P.O.
Agency Regulatory Notices EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett-Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency. Specific details on using the Energy Saving features can be found in the energy saver or power management section of the computer manual.
Agency Regulatory Notices C–4 v52 Monitor Guide
