user manual

Hardware options installation 41

Connect the DL320 hot-plug SATA/SAS cable provided in the storage controller option kit to the

storage controller and the backplane.

10. Install the fan assembly ("Installing the fan assembly" on page 20).

11. Install the access panel ("Installing the access panel" on page 17).

12. Install the server into the rack ("Installing the server into the rack" on page 25).

Installing PCI Express riser boards

1. Power down the server ("Powering down the server" on page 15).

2. Extend the server from the rack, if applicable ("Extending the server from the rack" on page 16).

3. Remove the access panel ("Removing the access panel" on page 17).

4. Remove the PCI riser board assembly ("Removing the PCI riser board assembly" on page 17).

5. Remove any installed expansion boards.

6. Remove the riser board with the slot for full-length expansion boards.