user manual

NOTE: Do not attempt to explicitly remove TDC_RT from your system. The PRODUCT REMOVE
command is not supported for TDC_RT although there appears to be an option to remove it.
TDC_RT is installed with the operating system and is tightly bound with it. HP or third-party
applications might require TDC_RT. Attempts to remove it might not work as expected and can
create undesirable side effects. An attempt to remove it results in a message similar to the
following:
%PCSI-E-HRDREF, product HP TDC_RT V2.3 is referenced by HP I64VMS OPENVMS
V8.4
The two products listed above are tightly bound by a software dependency.
If you override the recommendation to terminate the operation, the
referenced product will be removed, but the referencing product will have
an unsatisfied software dependency and may no longer function correctly.
Please review the referencing product’s documentation on requirements.
Answer YES to the following question to terminate the PRODUCT command.
However, if you are sure you want to remove the referenced product then
answer NO to continue the operation.
Terminating is strongly recommended. Do you want to terminate? [YES]
7.9.9.1 User Privileges and Quotas
Users of TDC_RT require various privileges, depending on the types of data to be collected.
Online help is available when running the collector application and specifies the privileges
required to collect each type of data. Enabling the following set of privileges enables collection
of all data items: CMKRNL, LOG_IO, NETMBX, PHY_IO, SYSLCK, SYSPRV, WORLD.
Users of the product also require working set quotas (WSQUO) greater than the following:
6000 pagelets on Alpha systems
7000 pagelets on Integrity server systems
7.9.9.2 Startup File
TDC_RT provides a startup file that should be launched during system startup. The startup file
defines several logical names required for use of the product, but the startup file does not actually
start the data collector.
Add the following line to SYS$MANAGER:SYSTARTUP_VMS.COM:
$ @SYS$STARTUP:TDC$STARTUP
To directly run TDC$STARTUP.COM, SYSNAM privilege is required.
7.9.9.3 Compatibility with Prior Releases
Note the following about prior releases of TDC software.
• TDC Version 1.n
For users of some third-party system-management applications, TDC Version 1.n was
distributed by web download. Applications developed using TDC Version 1.n will not work
with TDC Version 2.2 software until they are rebuilt using the TDC Version 2.2 Software
Developer’s Kit (SDK). You can obtain this SDK kit from the following website:
http://www.hp.com/products/openvms/tdc/
Data files created using TDC Version 1.n cannot be read by TDC_RT Version 2.2. Data files
created using TDC_RT Version 2.2 cannot be read using TDC Version 1.n.
148 After Installing or Upgrading the OpenVMS Operating System