QuickSpecs HP ProLiant BL30p Server Blade Overview ProLiant BL30p Server Blades Installed in Server Blade Enclosure 1. ProLiant BL30p Server Blades (16) 2.
QuickSpecs HP ProLiant BL30p Server Blade Overview At A Glance Maximum density ProLiant BL30p server blade Up to two Intel Xeon 3.
QuickSpecs HP ProLiant BL30p Server Blade Overview ProLiant BL30p Server Blade + ProLiant BL30p Blade Sleeve (holds 2 BL30p blades) + DA - 11958 North America — Version 6 — September 24, 2004 Page 3
QuickSpecs HP ProLiant BL30p Server Blade Overview BL p-Class Server Blade Enclosure with enhanced backplane components + OR Patch Panel (shown) or Patch Panel 2 GbE Interconnect Switch (shown) or GbE2 Interconnect Switch (fiber- or copper-based) BL p-Class Interconnects + BL p-Class power enclosure(s) and power supplies (three phase recommended) + OR Facility DC DA - 11958 North America — Version 6 — September 24, 2004 Page 4
QuickSpecs HP ProLiant BL30p Server Blade Overview OR Mini bus bars OR Scalable bus bars BL p-Class power distribution Bus boxes Configuration Steps For a complete ProLiant BL30p blade solution, do the following: 1. Select desired model, configuration and quantity of ProLiant BL30p server blades PLUS 2. Determine how many BL30p blade sleeves are required. Each BL30p blade sleeve holds two BL30p server blades and one server blade enclosure holds up to eight sleeves. PLUS 3. 3.
QuickSpecs HP ProLiant BL30p Server Blade Overview RJ-45 Patch Panel (230766-B21) or BL p-Class C-GbE2 Interconnect Kit (with 12 RJ-45 10/100/1000 T/TX/T external ports) (283192-B21) with or without optional ProLiant BL pClass GbE2 Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for BL30p Fibre Channel connectivity when using the GbE2 Interconnect Switch) or BL p-Class F-GbE2 Interconnect (with 8 LC 1000 SX and 4 RJ-45 10/100/1000 T/TX/T external ports) (283193-B21) wit
QuickSpecs HP ProLiant BL30p Server Blade Overview ProLiant BL p-Class Server Blade Enclosures with Enhanced Backplanes Installed in 42U Rack Redundant Power Configuration (left) and Non-Redundant Power Configurations (right) 1.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade) Processor Intel Xeon Processor 3.2-GHz/533-MHz with 2MB L3 cache Intel Xeon Processor 3.2-GHz/533-MHz with 1MB L3 cache Intel Xeon Processor 3.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade) Fiber Channel on the ProLiant BL30p The following items are needed to connect the ProLiant BL30p to a SAN via Fibre Channel: 1.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) ProLiant BL p-Class Server Blade Enclosure and Interconnects ProLiant BL p-Class Server Blade Enclosure 6U (10.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) ProLiant BL p-Class Interconnect Switch Option Interconnect Switch interconnects consolidate the Ethernet signals from the server blades to a smaller set of external copper-based or fiber-based uplink ports for connection to the network infrastructure. Like the Patch Panel interconnects, an option is also available to pass through individual BL20p G2 and BL30p Fibre Channel signals.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) ProLiant BL p-Class GbE2 Storage Connectivity Kit Option (supports a pair of GbE2 switches) The GbE2 Storage Connectivity Kit (option) is required for Fibre Channel signal pass-through when using a GbE2 Interconnect Switch Kit. Both Ethernet cable consolidation and Fibre Channel connectivity is possible using a single interconnect option.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) Required Network Cabling 10Base-T Categories 3, 4 or 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 100Base-TX Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 1000Base-T Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 1000Base-SX 50/125 µm Multimode Fiber, 400 MHz/Km (500 meters) 50/125 µm Multimode Fiber, 500 MHz/Km (550 meters) 62.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Power System and Rack Information) ProLiant BL p-Class Power System and Rack Information NOTE: To determine power configuration, please refer to the ProLiant BL p-Class Overview and Planning Whitepaper and sizing utility at http://www.hp.com/products/servers/proliant-bl/p-class/info/. ProLiant BL p-Class Power Enclosure 3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) ProLiant Essentials ProLiant Essentials Rapid Foundation Pack Deployment Pack Software for the ProLiant BL Server Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution for all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant Integration Module featuring ProLiant server pre-configured events for OS installation, and optimized software drivers, firmware and management agents.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) SmartStart SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using the I/O port with an attached USB CD-ROM device.
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) ProLiant BL p-Class Availability Features Power redundancy: hot-plug power supplies redundant AC feeds (requires two power enclosures when using blade enclosures with enhanced backplane components) interconnects options and server blade management module share power from both A- and B- side power buses Dual-Port Fibre Channel Mezzanine Card for redundant SAN connections Redundant ROM on each server blade ECC Memory Network adapte
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) Rack Airflow Requirements HP 10000 series racks provide enhanced airflow for maximum cooling, allowing racks to be fully loaded with servers and server blades using the latest server technologies.
QuickSpecs HP ProLiant BL30p Server Blade Models ProLiant BL30p X3.2-2MB, 1GB (2P) 360329-B21 ProLiant BL30p X3.2-1MB, 1GB (2P) 368271-B21 ProLiant BL30p X3.06/533MHz-512KB, 1GB (2P) 354566-B21 Processor(s) Two (2) Intel Xeon 3.
QuickSpecs HP ProLiant BL30p Server Blade Models ProLiant BL30p X3.06/533MHz-512KB, 1GB (1P) 354050-B21 Processor(s) One (1) Intel Xeon 3.
QuickSpecs HP ProLiant BL30p Server Blade Configuration Information - Factory Integrated Models NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.
QuickSpecs HP ProLiant BL30p Server Blade Options NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information. Unique Options ATA Hard Drive Kit for ProLiant BL30p, 2.5" parallel ATA drive, 60GB, 5400 rpm (option) 354052-B21 ProLiant BL30p Blade Sleeve Kit (option) 354101-B21 NOTE: Each blade sleeve supports one or two BL30p server blades.
QuickSpecs HP ProLiant BL30p Server Blade Options Processor Intel Xeon 3.06-GHz / 512-KB cache Processor Kit (option) 354053-B21 NOTE: There is no option kit offered for the ProLiant BL30p with Intel Xeon 3.2GHz processor because all models ship with two processors installed.
QuickSpecs HP ProLiant BL30p Server Blade Options BL p-Class Interconnects ProLiant BL p-Class Patch Panel 2 Kit with Fibre Channel pass-through (pair) 306465-B21 NOTE: Only one interconnect kit required per server blade enclosure. ProLiant BL p-Class Patch Panel (pair) 230766-B21 NOTE: Only one interconnect kit required per server blade enclosure.
QuickSpecs HP ProLiant BL30p Server Blade Options ProLiant BL p-Class Power Distribution Scalable Bus Bar 240560-B21 Mini Bus Bar 240559-B21 Dual Power Input Kit for Mini Bus Bar 364565-B21 Power Bus Box 240562-B21 ProLiant BL p-Class Other Diagnostic Station Options ProLiant BL p-Class Server Enclosure Shipping Bracket Option Kit NOTE: Used to secure one server blade enclosure in a rack when moving.
QuickSpecs HP ProLiant BL30p Server Blade Options solution; reference current compatibility information at http:/www.hp.
QuickSpecs HP ProLiant BL30p Server Blade Options Magneto-Optical Jukeboxes HP StorageWorks 9.1 GB Mid-range Optical Jukeboxes 300mx, 2 drive, 32 slot jukebox C1150M 600mx, 4 drive, 64 slot jukebox C1160M 700mx, 2 drive, 76 slot jukebox C1170M NOTE: Please reference the Magneto-Optical Jukebox data sheets at http://www.hp.com/go/optical for additional information needed to create a complete solution HP StorageWorks 9.
QuickSpecs HP ProLiant BL30p Server Blade Options Cluster Options ProLiant Cluster HA/F200 for Modular Smart Array 1000 252409-B24 NOTE: For additional information regarding the ProLiant Cluster for HA/F100, HA/F200 for Modular Smart Array 1000 please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11035_na/11035_na.
QuickSpecs HP ProLiant BL30p Server Blade Options Rack 10000 Series (Graphite Metallic) HP S10614 (14U) Rack Cabinet - Shock Pallet 292302-B22 HP Rack 10647 (47U) Cabinet - Pallet 245160-B21 HP Rack 10647 (47U) Cabinet - Crated 245160-B23 HP Rack 10642 (42U) Cabinet - Pallet 245161-B21 HP Rack 10642 (42U) Cabinet - Shock Pallet 245161-B22 HP Rack 10642 (42U) Cabinet - Crated 245161-B23 HP Rack 10636 (36U) Cabinet - Pallet 245162-B21 HP Rack 10636 (36U) Cabinet - Shock Pallet 245162-B22 HP
QuickSpecs HP ProLiant BL30p Server Blade Options Service and Support Offerings (HP Care Pack Services) NOTE: The HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.
QuickSpecs HP ProLiant BL30p Server Blade Memory ProLiant BL30p Server Blade (all models) Standard Memory 1024-MB PC2100 MHz Registered DDR SDRAM DIMM installed (1 x 1-GB SDRAM DIMM) Standard Memory Replaced with Optional Memory Up to 4096-MB of DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DDR DIMM memory expansion kits.
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications ProLiant BL p-Class Dimensions Server Blade Enclosure with enhanced backplane components Input Specifications Height 10.5 in (26.67 cm) Width 17.60 in (44.70 cm) Depth 28.86 in (73.30 cm) Rated input voltage -43 VDC to -53 VDC Rated input current 125 A at -48 VDC Rated input Power 6000 W Rated input voltage -43 VDC to -53 VDC Rated input current 14.
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications Operating and Dimensions Performance Specifications for ProLiant BL p-Class RJ-45 Patch Capability Panel Network Transfer Rate Height 10.405 in (26.43 cm) Width 1.535 in (3.899 cm) Depth 27.697 in (70.35 cm) IEEE 802.2, 802.3, 802.
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications Network Transfer Rate 10 Base-T (half-duplex) 10 Mbps 10 Base-T (full-duplex) 20 Mbps 100 Base-TX (half-duplex) 100 Mbps 100 Base-TX (full-duplex) 200 Mbps 1000 Base-TX (half-duplex) 1000 Mbps 1000 Base-TX (full-duplex) 2000 Mbps 1000 Base-SX (full-duplex) 2000 Mbps Connector 12 RJ-45, 2 DB-9 (C-GbE Interconnect Kit) 4 LC fiber, 8 RJ-45, 2 DB-9 (F-GbE Interconnect Kit) EMI FCC Class A ICES-003 Class A AS/NZS 3548 Class A
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications Operating and Dimensions Performance Specifications for ProLiant BL p-Class GbE2 Weight Interconnect Switch Performance Height 10.405 in (26.43 cm) Width 1.535 in (3.899 cm) Depth 27.697 in (70.35 cm) 12.0 lb/5.4 kg per interconnect switch 24 Gbps External port bandwidth per server blade enclosure (full duplex) Forwarding rate 1.
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications Operating and Performance Specifications for ProLiant BL p-Class Power Enclosures Single-Phase Model 3-Phase Model Height 5.25 in (13.34 cm) 5.25 in (13.34 cm) Width 27.15 in (68.96 cm) 27.15 in (68.96 cm) Depth 17.60 in (44.7 cm) 17.60 in (44.7 cm) No Hot-Plug Power Supplies 47.5 lb (21.55 kg) 47.5 lb (21.55 kg) All Hot-Plug Power Supplies 99.5 lb (45.13 kg) 125.5 lb (56.
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications Operating and Performance Specifications for ProLiant BL p-Class Power Distribution Devices Power Bus Box Mini Bus Bar Scalable Bus Bar Power Enclosures or facility DC feeds Supported (3U each) 1 1 or 2 1 or 2 Server blade enclosures supported (6U each) 1 up to 3 up to 5 9U 24U 36U Total rack height of supported enclosures Dimensions Height 5.1 in (12.95 cm) 19.45 in (49.40 cm) 48.57 in (123.37 cm) Width 3.6 in (9.
QuickSpecs HP ProLiant BL30p Server Blade Technical Specifications Operating and Performance Specifications for Facility DC Voltage Current Nominal input voltage -48 VDC Operating voltage range -48VDC ± 10% or -43.2 VDC to -52.8 VDC Max Input voltage slew rate 0.