user manual

Using the Scan Functions
8
C350 8-43
Binary Division and Scanned File Separation
The behavior of e-mail transmission varies depending on the combination
of the Binary Division and the Scanned File Separation (refer to “Basic
Setup of the Scan Functions” on page 8-11) settings.
✎
Note
If multiple pages are scanned when a hard disk is not installed, the
mail is sent in units of pages regardless of the Scanned File
Separation setting.
Combining (restoring) binary divided data
When scanned data that has been binary divided is received, the data can
be combined using an e-mail client software that has a function to do this.
For details, refer to the manual or help for your e-mail client software.
Scanned File Separation:
Yes and
Binary Division: Yes
If the scanned data exceeds the Maximum E-mail Size setting,
the data is divided in units of pages. If the data size of each
page after page division exceeds the Maximum E-mail Size
setting, the data is divided further at the binary level so that the
maximum size is not exceeded.
Scanned File Separation:
Yes and
Binary Division: No
If the scanned data exceeds the Maximum E-mail Size setting,
the data is divided in units of pages. If the data size of each
page after page division exceeds the Maximum E-mail Size
setting, the data is discarded.
Scanned File Separation:
No and
Binary Division: Yes
If the scanned data exceeds the Maximum E-mail Size setting,
the data is divided at the binary level so that the maximum size
is not exceeded.
Scanned File Separation:
No and
Binary Division: No
If the scanned data exceeds the Maximum E-mail Size setting,
the data is discarded.