user manual
Network Printing in a Windows Environment
6
C350 6-13
7 In Administrator mode of PageScope Web Connection, from the
“Network” tab, select Common Setting – NetWare Configuration,
and then specify the following settings for the printer controller.
❍ Enable NetWare: Select “Enable”.
❍ Frame Type: Select “Auto Detect”. (Select the frame type
according to the network environment.)
❍ Bindery/NDS: Select “Bindery”.
❍ Print Server Name:Print server name created in step 4
❍ Preferred File Server:
Name of the file server running PServer
❍ Print Queue Scan Rate:
1 (Change as necessary.)
❍ Mode: NPrinter
8 Restart this machine (turn it off, then on again).
9 Use the NetWare Server console to display the print server screen,
and then check that the created printer is shown as “Waiting for Job”
for the connected printer (0).