user manual

Callout Area on the screen Information or capability that the area provides
4 Memory Lists the memory information, PCL Driver Work Space (DWS), and
resource saving information.
5 Security Lists the status of the control-panel lock, disk write-protect options, and
direct-connect (USB or parallel) ports.
You can change the status of the Direct Connect ports on the Security
screen under the Settings tab by selecting or clearing the Disable
Direct Ports check box.
6 Paper Trays and Options Lists the size and type of media that is specified for each of the trays in
the product. If a duplexing unit or any paper-handling accessories are
installed on the product, information about those devices is also listed
here.
7 Calibration Information Lists the last color-plane registration (CPR) page count, the last CPR
page-count date, the last page count (in engine cycles) for DMAX/
DHALF, and the last DMAX/DHALF page-count date.
Color plane registration occurs when new print cartridges are installed
to compensate for any slight variations that might occur in cartridge
circumference.
DMAX is a density calibration of each print cartridge color at 100%
coverage; DHALF is also a density calibration of each print cartridge
color, but as a halftone instead of a full color. During halftone printing,
the dots of toner are spread out, and coverage of the toner is less than
100%.
8 Color Density Lists the cyan, magenta, yellow, and black (CMYK) values for highlights,
midtones, and shadows.
Table 2-2 Configuration Page (continued)
12 Chapter 2 Viewing product status from the HP EWS Information screens ENWW
Information