user manual

Send to Folder
Use the Send to Folder screen to send scanned documents to shared folders or FTP sites.
NOTE The shared folders or FTP sites must be operational before using this tool to add them
as destinations.
The following illustration and table describe how to use the Send to Folder screen.
Figure 4-2 Send to Folder screen
Table 4-2 Send to Folder settings
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web
Server.
2 Help Click to open a help file that contains information about the screens on the
Digital Sending tab.
3 Enable Send to Folder Select the Enable Send to Folder check box to turn on Send to Folder
capabilities on the device. Enabling will put a Send to Folder icon on the front
panel of the device. The user can select this icon to use this capability.
4 Add Click Add to set up a new folder destination.
5 Edit Click Edit to view or change the settings for the predefined folder.
6 Remove Click Remove to remove the selected folder from the predefined folder list.
7 Remove all Click Remove All to remove all the predefined folders from the list.
70 Chapter 4 Setting the digital sending options ENWW
Digital Sending