user manual

Callout Area on the screen Information or capability that the area provides
3 Send Faxes directly from the device's
internal modem
Send faxes directly from the device. When this
option is selected, you must select or type the
following information:
●
The country/region
●
The company name
●
The phone number to which the internal
modem of the device is connected
●
If applicable, any prefix number that your
phone system requires
via the Digital Sending
service
Send faxes by using the digital sending software
service.
4 Device Modem Settings Type these settings if directly from the MFP's internal modem is selected from
the Send Faxes list.
5 Advanced Click this button to open a new screen where you can set advanced product modem
settings, such as modem and ringer volume, and send and receive settings. From
this screen, you can also print a fax activity log and gain access to security and
diagnostics settings. For more information, see
Advanced Fax Settings .
6 Notification Set the notification options, such as whether a fax success or failure notification will
be sent, whether the notification will be printed, or whether the sender should
receive a notification report. Select the Include Thumbnail Image check box to
include a scaled-down image of the scanned document in the notification report.
7 Quality Select the resolution for the outgoing faxes.
8 Billing Code Type the billing code, if applicable. If you want to, you can select the Editable by
User check box to allow the user to change the code. Use the Minimum Length
field to set the minimum length of the billing code. The billing code can be a value
between 1 and 16.
Table 4-5 Send to Fax (continued)
ENWW Fax Settings 79
Digital Sending