user manual

●
Coalescence, grain.
Try reducing the amount of ink in your RIP software, then reprint the chart and check again.
Also consider the following tips.
●
You may have chosen a substrate preset that uses more ink than your substrate allows.
Consult the substrate vendor's Web site and HP's Web site for the latest substrate presets
and information.
●
Consult your RIP documentation to make sure you are applying the right substrate ICC profile.
●
Consult your RIP documentation on how to lower the total ink quantity of the preset.
2. Correct amount of ink: Each scale can be distinguished from the others, and there are no visible
defects.
3. Too little ink: The whole chart looks washed out.
Try increasing the amount of ink in your RIP software, then reprint the chart and check again.
NOTE: Backlit substrates normally require the use of the RIP's high ink limit option.
38 Chapter 4 Handle the substrate ENWW
Handle the substrate