user manual

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.

NOTE: The hard drive cable is included in the Misc Cable Kit, spare part number 608227-001.

Description Spare part number

750-GB, 7200 RPM 633252-001

750-GB, 5400 RPM (replaces 622394-001) 603787-001

750-GB, 5400 RPM (replaced by 603787-001) 622394-001

640-GB, 7200 RPM 621046-001

640-GB, 5400 RPM (replaces 608219-001) 603785-001

640-GB, 5400 RPM (replaced by 603785-001) 608219-001

500-GB, 7200 RPM 608218-001

320-GB, 7200 RPM 608217-001

250-GB, 7200 RPM 608216-001

160-GB solid-state drive 608215-001

Before removing the hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 45).

Remove the memory/wireless module compartment cover (see

Memory module on page 47)

Remove the hard drive:

1. Position the computer with the front toward you.

2. Loosen the two captive Phillips PM2.5×5.0 screws (1) that secure the hard drive cover to the

computer.

Component replacement procedures