User’s Guide HP f2105 LCD Monitor
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. This document contains proprietary information that is protected by copyright.
Text set off in this manner indicates that failure to w WARNING: follow directions could result in bodily harm or loss of life. Text set off in this manner indicates that failure to follow c CAUTION: directions could result in damage to equipment or loss of information. ✎ Text set off in this manner indicates additional information.
Contents 1 Product Features HP LCD Flat Panel Monitor. . . . . . . . . . . . . . . . . . 1–1 2 Safety and Maintenance Guidelines Important Safety Information . . . . . . . . Safety Precautions . . . . . . . . . . . . . Maintenance Guidelines . . . . . . . . . . . Cleaning the Monitor . . . . . . . . . . . . . Shipping the Monitor . . . . . . . . . . . . . Preparing the Monitor for Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 4 Operating the Monitor CD Software and Utilities . . . . . . . . . . . . . . . . . . 4–1 The Information File . . . . . . . . . . . . . . . . . . . . 4–1 The Image Color Matching File . . . . . . . . . . . . 4–2 Installing INF and ICM Files . . . . . . . . . . . . . . 4–2 Installing from the CD . . . . . . . . . . . . . . . . 4–2 Downloading from the World Wide Web . . . . . . . . . . . . . . . . . . 4–3 Using the Auto-Adjustment Function . . . . . . . . . 4–3 Front-Panel Buttons . . . . . . . .
Contents B Technical Specifications HP f2105 LCD Monitor . . . . . . . . . . Preset Video Modes . . . . . . . . . . . . LCD Monitor Quality and Pixel Policy Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1 B–3 B–5 B–6 C Agency Regulatory Notices Federal Communications Commission Notice. . Modifications . . . . . . . . . . . . . . . . . . . . . Cables. . . . . . . . . . . . . . . . . . . . . . . . . .
Contents viii User’s Guide
1 Product Features HP LCD Flat Panel Monitor The HP LCD Monitor (liquid crystal display) has an active matrix, thin-film transistor (TFT) screen. The flat-panel monitor features: ■ Large 21-inch (53.3 cm) diagonal viewable area display. ■ 1680 × 1050 factory-set resolution, plus full-screen support for lower resolutions.
Product Features 1–2 ■ Convenient access to two Universal Serial Bus (USB) 2.0 ports to use with two USB devices, such as a digital camcorder or a USB flash drive. You must connect your high-speed USB hub cable from the monitor to the PC to enable two USB 2.0 ports on the monitor. ■ Fast response time provides better experience for gaming and graphics. ■ Easy to view from a sitting or standing position, or while moving from one side of the monitor to the other.
Product Features ■ ■ User’s Guide Compliance with the following regulated specifications: ❏ European Union CE directives. ❏ Swedish MPR II 1990. ❏ TCO environmental requirements. This CD includes: ❏ f2105 User Guide. ❏ An Information (INF) file. ❏ Image Color Matching (ICM) file. ❏ Auto-adjustment pattern software. ❏ Safety information. ❏ TCO environmental requirements. ❏ Adobe Acrobat Reader.
Product Features 1–4 User’s Guide
2 Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. For information on the correct power cord set to use with your monitor, see “Power Cord Set Requirements” in Appendix B. To reduce the risk of electric shock or damage to your w WARNING: equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature.
Safety and Maintenance Guidelines To protect your monitor, as well as your PC, connect all c CAUTION: power cords for your PC and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with surge protection or uninterruptible power supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability.
Safety and Maintenance Guidelines Maintenance Guidelines To enhance the performance and extend the life of your monitor: ■ Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. ■ Adjust only those controls that are described in the operating instructions. ■ Turn your monitor off when not in use.
Safety and Maintenance Guidelines Cleaning the Monitor The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow these steps: 1. Turn off the PC and the monitor. 2. Unplug your monitor from the wall outlet before cleaning. CAUTION: Do not use benzene, thinner, ammonia, or any volatile c substances to clean the monitor screen or cabinet. These chemicals may damage the monitor. Do not use liquid cleaners or aerosol cleaners.
Safety and Maintenance Guidelines Shipping the Monitor Keep the original packing box in a storage area. You may need it later if you move or ship your monitor. When you ship the monitor, prepare it for shipping by folding it into position. Preparing the Monitor for Shipping Read the following warning and caution statements before beginning the procedure. Before folding the monitor, turn off the monitor power, w WARNING: USB devices, and disconnect the power, video, USB, and audio cables.
Safety and Maintenance Guidelines 1. Disconnect the power, video, audio, and USB cables from the side and back of the monitor. PC Audio Out AC Audio In DVI VGA USB In 2. Push the panel straight down to flatten the hinge (1), as shown in the following illustration. Place the strap that came with the monitor around the base by threading it through the hinge (2).
Safety and Maintenance Guidelines Rotate the front of the panel down to a horizontal position (3). Avoid applying pressure to the LCD screen, doing so can cause damage. 1 Audio IN Audio DVI 2 VGA USB2 IN OUT AC 3 Folding the monitor for shipping Do not lay the LCD panel of the monitor on a flat w WARNING: surface while trying to attach the strap to the monitor base. The hinge of the base can spring suddenly and this could cause damage or injury.
Safety and Maintenance Guidelines 2–8 User’s Guide
3 Setting Up the Monitor Before You Begin 1. Unpack the monitor. Make sure all contents are included. Store the box and packing foam. 2. Ensure that the power is turned off to the monitor, PC system, and other attached devices (monitor ships in off position). 3. Determine the video cable or cables that you want to connect from the PC video card outputs to the VGA and DVI-D (select models only) connectors on the monitor. You can connect one or both cables. ❏ VGA cable: Standard VGA 15-pin cable.
Setting Up the Monitor Installing the Monitor You can install the monitor on a desktop or wall mount (not included with monitor). Place the monitor in a convenient, well-ventilated location near your PC. If the monitor is installed on a: ■ desktop or table, see “Placing the Monitor on a Desktop” in this chapter. ■ wall, swing arm, or other mounting fixture, see “Wall Mounting the Monitor” in this chapter. Connect the monitor after you have installed it.
Setting Up the Monitor 1. Set the monitor on a flat surface. 2. Hold the base of the monitor (1) and lift up the panel at the top (2) without touching the LCD screen, as shown in the following illustration. 3. Continue to lift the panel (3) to its easily adjustable position. 2 1 3 Audio IN DVI VGA USB2 IN Audio IN Audio o OUT Audi DVI VGA USB2 IN OUT AC AC Opening the monitor 4. Stand the monitor in the upright position on a desktop or table.
Setting Up the Monitor Tilt and adjust the height of the monitor for proper viewing. Do not tilt the monitor beyond its easily adjustable position. You can adjust the monitor so that the panel is fully forward and the bottom of the panel is close to the desktop, if desired. –5˚ 30˚ Adjusting the monitor tilt Avoid applying pressure to the LCD screen; doing so c CAUTION: can cause damage. Tilt the monitor carefully.
Setting Up the Monitor Wall Mounting the Monitor Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the monitor pedestal and back mounting cover. You will need a Phillips head screwdriver. Read the following warning and caution statements before beginning the procedure. Ensure that the monitor is lying flat, with the screen w WARNING: down. Attempting to remove the pedestal base assembly from the monitor while it is upright may result in injury to the user.
Setting Up the Monitor 2. Pull up on the bottom edge and remove the back cover (1), as shown in the following illustration. Set the back cover aside. Six screws are exposed. 1 Au dio OU VG A US B2 IN DV I Au dio IN T AC 3 2 Wall mounting the monitor 3. Holding the pedestal base assembly so it cannot fall, remove the six screws (2). Use a Phillips head screwdriver. Lift the assembly (3) and set it aside.
Setting Up the Monitor 4. Save the removed items (screws, back cover, and pedestal base assembly) for future use. The four threaded mounting holes on the monitor panel are spaced 100 mm apart and are compliant with the VESA standard for mounting flat-panel monitors. 5. Use the four holes to attach a swing arm or other mounting fixture. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
Setting Up the Monitor Back and Side-Panel Connectors Back and side-panel connectors PC Audio Out Audio In AC H DVI VGA USB In A G B C Item Label Icon Connector D E F Function A (Stereo Headphone jack) Connects headphones and mutes monitor speakers B AC (Power) Provides power to monitor C Audio Out Connects external speakers or subwoofer (sold separately) D Audio In Connects monitor speakers to PC E DVI Connects monitor to PC (select models only) F VGA Connects monitor to P
Setting Up the Monitor Connecting the Monitor to the PC To connect the monitor video input to the PC: 1. Place the monitor upright, as shown in the following illustration. 2. Connect the VGA or DVI-D (select models only) video cable from the monitor to the VGA or DVI video connector on the back panel of the PC. can connect the VGA cable, the DVI-D cable, or both. Only ✎ You one cable is connected for typical installations.
Setting Up the Monitor ❏ Connect one end of the 15-pin VGA cable to the VGA (analog) input connector on the monitor. Then connect the other end to the VGA (analog) output connector on the PC.
Setting Up the Monitor 3. Connect one end of the DVI-D cable to the DVI-D input connector (select models only) on the monitor. Then connect the other end to the DVI connector on the PC. SERIAL PC Audio Out AC Audio In DVI VGA USB In 1394 ETHERNET IN OUT S-VIDOUT COMPOUT DVI DVI Connecting the DVI-D cable DVI-D connector (select models only) on the monitor and the ✎ The DVI-D cable is for digital-to-digital connection only.
Setting Up the Monitor 4. Connect the audio cable to the Audio Line Out connector (green) on the PC and to the Audio In connector (green) on your monitor to enable the built-in monitor speakers. in headphones to the monitor disables the built-in monitor ✎ Plugging speakers. PC Audio Out AC Audio In DVI VGA USB In SERIAL 1394 ETHERNET IN OUT S-VIDOUT COMPOUT Audio In Audio Connecting the audio cable 5.
Setting Up the Monitor 7. Connect the USB hub cable from the PC to the USB In connector on the monitor to enable the two USB 2.0 ports on the side of the monitor. The USB 2.0 ports cannot work without the USB cable attached.
Setting Up the Monitor 8. Read the following warning, and then connect the power cord to the monitor and to an electrical wall outlet. PC Audio Out AC Audio In DVI VGA USB In AC Connecting the power cord To reduce the risk of electric shock or damage to your w WARNING: equipment: 3–14 ■ Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet.
Setting Up the Monitor 9. Place the cables through the two cable management clasps on the back of the monitor base. See illustration in “Cable Management” in this chapter. 10. Adjust the monitor height and angle. 11. Turn on the PC, the monitor, and any other attached devices. 12. Adjust the display using the Menu button, the Adjust buttons, and the Auto/Select button. If the monitor does not function correctly, configure the monitor as described in “Using the Auto-Adjustment Function” on page 4–3.
Setting Up the Monitor Connecting USB Devices to the Monitor You can connect two USB devices, such as a digital camcorder or a USB flash drive, to your monitor. must connect the USB hub cable from the monitor to the PC to ✎ You enable the USB 2.0 ports on the monitor. Refer to step 7 in the section “Connecting the Monitor to the PC.
4 Operating the Monitor CD Software and Utilities The CD that comes with this monitor contains files you can install on your PC: ■ An INF file ■ An ICM file ■ Auto-adjustment pattern utility ■ Adobe Acrobat Reader The auto-adjustment pattern utility is a single pattern program that helps improve the picture quality of your VGA (analog) input monitor. See “Using the Auto-Adjustment Function” in this chapter. Adobe Acrobat Reader can be installed from the menu.
Operating the Monitor The Image Color Matching File The ICM files provide more accurate color representation by supplying data to graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to the monitor screen. The ICM files contain a monitor color system profile. These files are activated from within graphics programs that support this feature.
Operating the Monitor Downloading from the World Wide Web To download the latest version of INF and ICM files from the HP Support Web site: 1. Refer to: http://www.hp.com/support 2. Select your country/region. 3. Select Download Drivers and Software. 4. Enter the model number for your monitor to go to the software download pages for your monitor. 5. Download and install the INF and ICM files using the instructions in the download pages.
Operating the Monitor To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Press the Auto/Select button on the monitor front panel. ❏ You can also press the Menu button, then select Auto-Adjustment from the OSD Main Menu. See “Adjusting Monitor Settings” in this chapter. ❏ If the result is not satisfactory, continue with the procedure. 3. Insert the CD in your disc drive. The CD menu launches. 4. Select Open Auto-Adjustment Software. 5.
Operating the Monitor Front-Panel Buttons The monitor buttons are located on the front panel. A B C D E F G Front-panel buttons Item A Label /– (Vol down/minus) B /+ (Vol up/plus) C Menu (Onscreen display) User’s Guide Function Decreases the volume level of the monitor speakers. Does not control volume of optional subwoofer or optional external speakers (sold separately). Increases the volume level of the monitor speakers.
Operating the Monitor Item Label D /– (VGA/minus) E /+ (DVI/plus) F Auto/Select G Power 4–6 Function OSD Menu Active OSD Inactive Navigates down or Selects the VGA (analog) left browse, and video input. adjusts settings down. OSD Menu Active Navigates up or right browse, and adjusts settings up. OSD Inactive Selects the DVI video input (select models only). OSD Menu Active Acts as an Enter (Select) key to select setting screen options.
Operating the Monitor Using the Onscreen Display 1. If the monitor is not already on, press the Power switch (G) to turn on the monitor. 2. To access the OSD menu, press the Menu button (C). The OSD Main Menu displays. Auto Adjustment appears for VGA (analog) connections only. 3. To access the Advanced OSD menu, press the Menu button again. The OSD Advanced Menu displays. See “Adjusting Monitor Settings” in this chapter for more information. 4.
Operating the Monitor Adjusting Monitor Settings The screen adjustments are set in the OSD menus. Two OSD menus are available: ■ Main ■ Advanced Main Menu To access the Main Menu, press the Menu button on the monitor. The Main Menu level 1 displays. The following table describes Main Menu selections and levels.
Operating the Monitor Advanced Menu To access the Advanced Menu, press the Menu button again (twice), or select Advanced Menu from the Main Menu. The Advanced Menu level 1 displays. selecting the Advanced Menu from the Main Menu, the ✎ After Advanced Menu remains the default OSD on subsequent power-ups of the monitor until the Main Menu is selected or factory reset is applied. The Advanced Menu has up to three levels and can be viewed in one of the available languages.
Operating the Monitor Advanced Menu Level 1 Level 2 Level 3 Clock Adjustment Scale Clock Phase Adjustment Scale Factory Preset Cancel Save and Return Color 9300 K 6500 K Custom Color RGB Color Adjustment Custom Color Cancel Save and Return Language Deutsch English English Español Français Italiano Nederlands Cancel Save and Return Management 4–10 Power Saver On/Off Selection Power On Recall On/Off Selection Mode Display On/Off Selection Power On Status Display On/Off Selection User
Operating the Monitor Advanced Menu Level 1 Level 2 Sleep Timer Level 3 Factory Preset Timer Menu Video Input Select Analog (VGA) Digital (DVI) Auto Detect Basic Menu Cancel Save and Return OSD Control Horizontal Position Adjustment Scale Vertical Position Adjustment Scale OSD Timeout Adjustment Scale OSD Transparency Adjustment Scale Cancel Save and Return Information (displays model/input data) Factory Reset Yes No Exit User’s Guide 4–11
Operating the Monitor Selecting the Video Input Connectors The two input connectors are: ■ VGA connector (analog) ■ DVI-D connector (digital) (select models only) The monitor automatically determines which inputs have valid video signals and displays the image. The video input can be manually selected through the OSD feature or selected using the monitor buttons by pressing the /– (Minus) button for VGA /+ (Plus) button for DVI (digital) input.
Operating the Monitor Identifying Monitor Conditions Special messages display on the monitor screen for the following monitor conditions: ■ Input Signal Out of Range — Indicates the monitor does not support the video input signal because the resolution or response rate are set higher than the monitor supports. Set the resolution and response rate to the value displayed. Restart your PC for the new settings to take effect. ■ Going to Sleep — Indicates the screen display is entering a sleep mode.
Operating the Monitor Adjusting Screen Quality The auto-adjustment feature automatically fine-tunes the image quality for display size, position, clock, and phase each time a new video mode is displayed. For more precise adjustments of the VGA (analog) input, run the Auto-Adjustment software on the CD. See “Using the Auto-Adjustment Function” in this chapter. If additional image quality improvement is desired, use the Clock and Phase controls of the monitor to fine-tune the image.
Operating the Monitor Enhancing the Video Function Wide-screen monitors like the HP f2105 have a tendency to stretch the picture when the monitor is set at Fill to Screen mode. You can use the Custom Scaling feature described below to change the monitor display mode to a One to One or a Fill to Aspect Ratio mode which removes the stretching effect. The monitor includes a custom scaling feature that allows you to enhance the video performance by adjusting the viewable image to an optimal display.
Operating the Monitor 4. In the Custom Scaling menu, use the OSD up and down buttons on the front panel to select and highlight the desired display format: 4–16 ❏ One to One — The image is not stretched or altered, but it may appear smaller than the active viewing area. Black borders may appear at the edge of the display, depending on the resolution setting. When custom scaling is set to One to One, the Sharpness selection is disabled.
Operating the Monitor ❏ Fill to Aspect Ratio — This display format adjusts the horizontal and vertical size of the image to fill the screen as much as possible while maintaining the selected aspect ratio. For most video modes, black borders appear on the sides of the screen, but the image is not skewed or stretched. This format optimizes the image for 16:9 format sources such as wide-screen broadcast and DVD format. DVD wide-screen modes may provide formats other than ✎ Some 16:9.
Operating the Monitor ■ Clock Phase — Increase or decrease the value to minimize video distortion or video jitter. Use these controls only when the auto-adjustment function does not provide a satisfactory monitor image in analog mode. To obtain the best results: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Display the adjustment pattern application provided on the CD. 3. Access the Advanced Menu OSD; select Image Control. 4.
Operating the Monitor Power-Saver Feature When the monitor is in normal operating mode, the Power light is blue and the monitor uses the typical power wattage. For power usage, refer to Appendix B, “Technical Specifications”. The monitor also supports a power-saver mode that is controlled by the PC. When the monitor is in the reduced power state, the monitor screen is blank, the backlight is off, and the Power light is amber. The monitor uses minimum power.
Operating the Monitor 4–20 User’s Guide
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch is turned off. Turn on the power. Video cable is improperly connected. Connect the video cable properly. For more information, see “Connecting the Monitor to the PC” on page 3–9. Screen blanking utility is active.
Troubleshooting Problem Possible Cause Solution Image is not centered. Position may need adjustment. Press the Menu button to access the OSD menu. Select Image Control/ Horizontal Position or Vertical Position to adjust the horizontal or vertical position of the image. “Check Video Cable” displays on screen. Monitor video cable is disconnected. Connect the monitor video cable to the VGA connector on the PC, or connect the DVI-D signal cable to the DVI connector on the PC.
Troubleshooting Problem Possible Cause Solution Sound is not working. Audio In and Audio Out connectors were not used properly. Microphones are plugged in. Check the setup poster and make sure the audio cable is connected correctly to the monitor and the PC. If you have external speakers or a subwoofer (sold separately), connect your external speaker cable to the Audio Out (blue) connector on the monitor to your speakers or subwoofer.
Troubleshooting Using the World Wide Web Before contacting customer service, refer to the HP Technical Support at: http://www.hp.com/support Select your country/region, and then follow the links to the support page for your monitor. Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. For technical support contact information, refer to the printed documentation included with the monitor.
B Technical Specifications All specifications represent the typical specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower. HP f2105 LCD Monitor Specifications Display type TFT LCD Active Matrix Screen size 21 inch (53.3 cm) Viewable image size Display height 17.8 inch diagonal (45.4 cm) 11.2 inches (28.4 cm) Tilt –5o to 30o Face treatment Antiglare polarizer with hard coating Maximum weight (unpacked) < 21.1 lb. < 9.
Technical Specifications Specifications Dot pitch 0.270 x 0.
Technical Specifications Preset Video Modes This monitor automatically recognizes many preset video input modes that appear properly sized and centered on the screen. The following modes are assigned at the factory and are the most commonly used display resolutions: HP f2105 supports preset modes 1 through 21. Factory Preset Video Input Modes Preset Pixel format Horizontal frequency (kHz) Vertical frequency (Hz) 1 640 x 480 31.5 59.9 2 640 x 480 37.5 75.0 3 720 x 400 31.5 70.
Technical Specifications Factory Preset Video Input Modes (Continued) B–4 Preset Pixel format Horizontal frequency (kHz) Vertical frequency (Hz) 16 1280 x 1024 80.0 75.0 17 1280 x 1024 91.2 85.0 18 1600 x 1000 61.7 60.0 19 1600 x 1200 Maximum resolution (scaled to fit screen) 75.0 60.0 20 1680 x 1050 Optimum resolution 65.3 60.0 21 1920 x 1200 Maximum resolution (scaled to fit screen) 74.0 60.
Technical Specifications LCD Monitor Quality and Pixel Policy The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.
Technical Specifications Power Cord Set Requirements The monitor power supply is provided with automatic line switching (ALS). This feature allows the monitor to operate on input voltages between 100–120Vv or 200–240Vv. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country/region where you purchased the equipment.
C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agency Regulatory Notices Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations.
Agency Regulatory Notices Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Hewlett-Packard Company P. O.
Agency Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Agency Regulatory Notices Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Agency Regulatory Notices Japanese Notice Japanese Power Cord Notice Korean Notice C–6 User’s Guide
Agency Regulatory Notices Materials Disposal This HP product contains the following materials that require special handling at end-of-life: ■ Mercury in the fluorescent lamp in the display LCD. ■ Lead in the solder and some component leads. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, HP Planet Partners (http://www.hp.com/recycle), or the Electronic Industries Alliance (EIA) (http://www.eiae.
Agency Regulatory Notices Part Number: 393631-B22 C–8 User’s Guide
