user manual

OUTPut:EXTernal[1]:FEED < source >
•
<source > = "TRIGger[:STARt|SEQuence[1]]"
Outputs a trigger signal to the "Ext 1" BNC port each time a convert
pulse is sent to the A/D converter.
• <source > = "SENSe[1|2]:ROSCillator"
The significant edge of a TTL signal is the falling edge. Therefore,
the output goes low with the falling edge of an external reference
signal, and goes low with the rising edge of reference sources
ECLTrg<n > and CLK10.
• <source > = "SENSe:SWEep:OFFSet:POINts"
The normally high output port goes low after the pre-arm reading
count has been reached.
Chapter 3 Understandin
g
the HP E1429 Di
g
itizer 127