user manual

68
Chapter 4, Troubleshooting
Errors When Loading and Running the Software
Menu Screens in
this Book do not
Match the Screens
that You See
Problem:
You may have loaded another software procedure from the utility software
memory card that is shipped with each PCS Interface. Procedures for Test System
Connectivity (SYS_CONN) and Manual Control (MANUAL) also reside on the
memory card and are loaded in the same manner as the CDMA/PCS BS test
software.
Solution:
1 Return to the main menu. If it does not read CDMA PCS Main Menu at the top of the
display, you most likely have another program loaded and running.
2 Pause the program by pressing the CANCEL key and press the TESTS key. In the
TESTS menu, the Procedure Filename should be PCSCDMA.
3 If not, follow the steps in "Getting Started" in chapter 1 to load and run the CDMA/PCS
BS test software.