user manual

3-6

VME Card Installation

Installing VME Accessory Card Hardware

You’ll need these tools to access the VME cards:

• Small flat-tipped screwdriver

• Medium flat-tipped screwdriver

• Static-free work space

Installation Procedures

CAUTION: When removing the VME module, the PCI/EISA module must be removed

first. When reinstalling, replace the VME module first.

1 Stop any application programs, and then shut down the SPU.

2 Turn the VMEbus chassis off, and unplug the power cords.

3 Using Figure 3-1 as a guide, loosen the captive screw on each end of the

slot covers where you will install VME card(s), and then remove the cov-

ers.

Figure 3-1 Installing a VME Card