user manual

7-7

Using Mass Storage Devices

Operating the CD-ROM Drive

Loading a CD-ROM Disc

This CD-ROM drive has an automatic loading/ejecting feature. To load a

disc in the CD-ROM drive, follow these steps:

Figure 7-3 Placing a CD-ROM Disc in a Drive

Check that the workstation is powered on.

2 To open the disc tray, press and release the load/eject button on the CD-

ROM drive.

3 Be sure the disc holders are slid away from the disc.

4 Hold the disc by the edges with the label side up and place it in the disc

tray as shown in

Figure 7-3.

5 To close the disc tray, push the front of the disc tray gently towards the

drive until it closes by itself.