user manual

Set Up the Pattern Generator Format Menu

For the pattern generator to output the "walking ones" to the logic analyzer,

the lower four bits of Pod 4, which is connected to the training board through

the TTL Data Pod, must be assigned to PATGEN.

Highlight the Analyzer field in the top-left corner of the screen, and

press the

Select key. Highlight Patt Gen, and press the Select key.

2 If the Format Menu of the Pattern Generator is now displayed, go to

step 4.

3 Press the Format MENU key.

4 Highlight Lab1 below Label, and press the Select key. Highlight Modify

Label

in the pop-up menu, and press the Select key.

5 Type PATGEN, and Press the Done key.

6 Highlight the field showing the Pod B4 to the right of PATGEN, and

press the

Select key.

Setting Up the Pattern Generator Format Menu

The lower 4 bits of

Pod B4 are assigned to

output the "walking

ones" .

Using the Pattern Generator

Set Up the Pattern Generator Format Menu

9-10