user manual

HP 8517B S-Parameter Test Set Manual 6-3
HP 8517B Test Set Replacement Procedures
Equipment Needed But Not Supplied
Table 6-1 lists the equipment needed to replace the assemblies documented
in the following procedures. See Figure 6-2 to locate the test set assemblies.
Table 6-1 Replacement-Procedure Tools Needed
Tools Used for Procedure: HP Part Number
2 point Pozidriv screwdriver all components 8710-0900
1 point Pozidriv screwdriver all components 8710-0899
5/16 inch torque wrench, 90 N-cm (8 in-lb) all components and 3.5 mm semi-rigid cables, 2.4/1.85
mm cables
8710-1765
5/16 inch torque wrench, 112 N-cm (10 in-lb) HP 8516A 2.4 mm semi-rigid cables 8710-1655
1/2 inch torque wrench, 280 N-cm (25 in-lb) 7 mm, 2.4 mm, 1.85 mm test port connectors 8710-1581
9/16 inch torque wrench, 470 N-cm (42 in-lb) HP 8517B rear panel 2.4 mm connectors 8710-1580
20 mm torque wrench, 90 N-cm (8 in-lb) 2.4 mm and 1.85 mm test port connectors 8710-1764
2.9 mm gage kit port connectors Part of HP 85056A Cal Kit
anti-static mat all components 9300-0797
wrist strap all components 9300-1257
clip lead C1-C4 capacitors any supplier
needle nose pliers couplers any supplier
wire cutters couplers, B1 fan any supplier
T-10 Torx screwdriver all components 8710-1623
T-15 Torx screwdriver all components 8710-1622
9/16 inch 50 in-lb torque wrench test ports 8710-1948
9/16 inch nut driver connector repair 8720-0008
1/2 inch torque wrench, 280 N-cm (25 in-lb) connector repair 8710-1581
100
Ω , 20 watt resistor C1-C4 capacitor removal 0819-0019
1 inch torque wrench, 800 N-cm (72 in-lb) coupler removal and test port connector flange removal MTB 100 72 lb-in E
1
5/16 inch open end wrench fan replacement and test port connector removal any supplier
1/2 inch open-end wrench RF input connector any supplier
1/2 x 9/16 inch thin wrench, fixed Test port connector removal 8710-1770
5/16 inch thin wrench 3.5 mm, 2.4 mm, 1.85 mm semi-rigid connector
removal
8710-2079
1. Order from Mountz Company, 1080 North 11th Street, San Jose, CA 95112, phone [phone], or contact Mountz through the
internet at http://www.mountztorque.com/html/home.htm