user manual

6 Managing power
Initiating Sleep and Hibernation
Windows has two power-saving states, Sleep and Hibernation.
●
Sleep–The Sleep state is automatically initiated after a period of inactivity. Your work is saved to
memory, allowing you to resume working very quickly. You can also initiate Sleep manually. For
more information, see
Manually initiating and exiting Sleep on page 35.
● Hibernation–The Hibernation state is automatically initiated if the computer is in the Sleep state
for an extended period. Hibernation puts your open documents and programs on your hard
drive, and then turns off your computer.
NOTE: You can manually initiate Hibernation. See Manually initiating and exiting Sleep
on page 35 and Manually initiating and exiting Hibernation on page 36.
CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video
playback, or loss of information, do not initiate Sleep while reading from or writing to a disc or an
external media card.
NOTE: You cannot connect to a network or perform any computer functions while the computer is in
the Sleep state or in Hibernation.
Manually initiating and exiting Sleep
▲
To initiate Sleep, from the Start screen, point to the far-right upper or lower corner of the screen
to display the charms. Click Settings, click the Power icon, and then select Sleep.
To exit Sleep:
●
Briefly press the power button.
●
Press a key on the keyboard.
When the computer exits Sleep, the power lights turn on and your work returns to the screen.
NOTE: If you have set a password to be required on wakeup, you must enter your Windows
password before your work will return to the screen.
Initiating Sleep and Hibernation 35