user manual

Item Limit
Note the following:
• All IP Addresses Results in two (2)
address template rules. One for all IPv4
addresses, and another for all IPv6
addresses.
• All non link local IPv6 Results in four (4)
address template rules:
ƕ :: to
FE7F:FFFF:FFFF:FFFF:FFFF:FFFF:F
FFF:FFFF for both local and remote
addresses
ƕ :: to
FE7F:FFFF:FFFF:FFFF:FFFF:FFFF:F
FFF:FFFF for local addresses
ƕ FE81:: to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:F
FFF:FFFF for remote addresses
ƕ FE81:: to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:F
FFF:FFFF for local addresses,
ƕ :: to
FE7F:FFFF:FFFF:FFFF:FFFF:FFFF:F
FFF:FFFF for remote addresses
ƕ FE81:: to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:F
FFF:FFFF for both local and remote
addresses
• All Broadcast/Multicast Addresses
Results in four (4) address template rules:
ƕ 224.0.0.0 to 239.255.255.255 IPv4
local addresses and all IPv4 remote
addresses
ƕ A single IPv4 local address, and all
IPv4 remote addresses
ƕ 255.255.255.255 local address, and
all IPv4 remote addresses
ƕ FF00:: / 8 local IPv6 addresses, and
all IPv6 remote addresses
NOTE: To avoid multiple rules for these
predefined address templates, you can create
custom address templates.
Maximum number of user-defined address
templates.
5
Maximum number of services you can add to
a user-defined service template.
NOTE: The predefined All Services template
is not subject to this limitation and includes all
services supported by the print server.
64
Maximum number of services you can add to
the policy.
64
Appendix D
(continued)
218 Network setup