user manual

Item Limit
For example, if a user-defined service
template consists of 64 services, then it is the
only service template you can use.
Maximum number of service templates in the
policy.
10
Maximum number of user-defined custom
service templates.
5
Reset network settings
To reset the administrator password and network settings, complete the following steps:
1.
Touch right arrow
, and then select Network.
2. Touch Restore Network Defaults, and then select Yes.
NOTE: Print the network configuration page and verify that the network settings have been
reset. For more information, see
Understand the network configuration page.
By default, the network name (SSID) is “hpsetup” and the communication mode is “ad hoc.”
NOTE: Resetting the printer’s network settings also resets the printer’s firewall settings. For
more information about configuring the printer’s firewall settings, see
Configure the printer’s
firewall settings.
Set up the printer for wireless communication
You may set up the printer for wireless communication.
NOTE: If you encounter problems, see Solve wireless problems.
Make sure the printer is not connected to the network using a network cable.
The sending device must have built-in 802.11 capabilities or an 802.11 wireless card installed.
The printer and the computers that use it must be on the same subnet.
Before installing the HP software, you might want to find out the settings of your network. Obtain
the information from your system administrators, or complete the following tasks:
• Obtain your network's network name or Service Set Identifier (SSID) and communication
mode (infrastructure or ad hoc) from the configuration utility for the network's wireless access
point (WAP) or the computer's network card.
• Find out the type of encryption your network uses, such as Wired Equivalent Privacy (WEP).
• Find out the security password or encryption key of the wireless device.
This section contains the following topics:
•
To set up a wireless communication using the Wireless Setup Wizard
•
Understand 802.11 wireless network settings
•
Test the wireless connection
•
Change the connection method
•
Guidelines for ensuring wireless network security
•
Guidelines for reducing interference on a wireless network
To set up a wireless communication using the Wireless Setup Wizard
The Wireless Setup Wizard provides an easy way to set up and manage a wireless connection
(both infrastructure and ad hoc connections) to your printer.
(continued)
Set up the printer for wireless communication
219