user manual

DC Current 5 VDC - <1000 mA typical, < 1600 mA maximum
12 VDC -< 600 mA typical, < 1400 mA maximum
Environmental
(all conditions
non-condensing)
Temperature 41° to 122° F (5° to 50° C)
Relative Humidity 10% to 90%
Maximum Wet Bulb
Temperature
86° F (30° C)
HP 22-n-1 Media Card Reader
USB Interface USB 2.0 High-speed interface
NOTE:
Requires the USB cable to be connected to the internal USB 2.0 port or a USB 2.0 PCI card.
Advance protocol support Supports hardware ECC (Error Correction Code) function
Supports hardware CRC (Cyclic Redundancy Check) function
Supports MS 4-bit parallel transfer mode
Supports MS-PRO 4-bit parallel transfer mode
Supports MS PRO-HG Duo 4-bit parallel transfer mode
Supports SD 4-bit parallel transfer mode
Supports high-speed 50Mhz SD 4-bit card (version 2.0)
Supports high-speed 52Mhz MultiMediaCard 8-bit card (version 4.2)
Supports CF v4.0 with PIO mode 6 and Ultra DMA mode
Supported media type CompactFlash Type I
CompactFlash Type II
Microdrive
MultiMediaCard
Reduced Size MultiMediaCard (RS MultiMediaCard)
MultiMediaCard 4.2 (MultiMediaCard Plus, including MultiMediaCard Plus HC)
Reduced Size MultiMediaCard 4.2 (MultiMediaCard Mobile, including MultiMediaCard Mobile HC)
Secure Digital Card (SD)
Secure Digital High Capacity (SDHC)
miniSD
miniSD High Capacity
QuickSpecs
HP rp5800 Retail System
Technical Specifications – Optical Drives and Storage
DA - 13982 North America — Version 12 — November 8, 2013 Page 38