user manual

4 537503-001 — Removing and Replacing an Add-in Card
9 On the back of the computer, remove the screw from
the bracket cover for the add-in cards. If it is present,
also remove the additional screw that secures a large
graphics card.
10 Lift off the bracket cover.
11 If present, disconnect any cables connected to
the card.
12 Look at the add-in card socket for a release latch,
which is present on some sockets.
IMPORTANT: Some sockets have a release latch
that must be disengaged to remove the card from the
socket. The release latch style may vary. This example
shows a release pad that must be pushed down as
you lift the card. A release lever must be pushed out
from the socket as you lift the card.