user manual

537500-001 — Removing and Replacing Memory 7
20 Touching only the top edge of the memory module, lift
it out of the socket.
Replacing Memory
1 Touching only the top edge of the memory module,
locate the notch on the bottom edge.
2 Look at the memory module socket for the tab that
matches the notch on the memory module.
IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
NOTE: Install the memory modules into the blue sockets
first, starting with the largest capacity module placed in
the socket closest to the processor on the motherboard.
NOTE: Each type of memory has a different notch
position. Incompatible memory modules cannot be
installed in the memory socket.