user manual

Solenoids
Solenoids are controlled by the DC Controller. Each solenoid
drives a specific roller (see Table 5-1). The DC Controller outputs
+24B VDC to energize the solenoids at the proper time. When
either of the doors are open, the +24B VDC is removed and the
solenoids are disabled.
Solenoid Description PCA
SL1 PC tray (Tray 2) Pickup
Roller Clutch Solenoid
Paper Control PCA (J704)
SL2 Multi-purpose (MP) Tray
(Tray 1) Pickup Roller
Clutch Solenoid
Paper Control PCA (J702)
SL3 Lower Cassette (LC or
Tray 3) Pickup Roller
Clutch Solenoid
Lower Cassette (J853)
located in Lower Cassette
Drive Assembly. See
Chapter 8 for location.
Table 5-1 Solenoid Signals
Figure 5-3 Printer Solenoid and Photosensor Locations
Functional Overview 5-5