user manual

Formatter PCA Removal
Caution
The Formatter PCA is very sensitive to Electro-
static Discharge (ESD) damage. Observe proper
ESD procedures when servicing the printer.
Note
Before removing the old Formatter PCA, print a
05 SELF TEST to check the current printer page
count, if possible. If a self test is not possible,
enter the Service Mode, if possible, to display the
page count (see “Service Mode” in Chapter 3).
Remove the Formatter Cage from the printer before beginning
the Formatter PCA removal procedure. After the Formatter Cage
is removed, remove the Formatter PCA as detailed on the
following pages.
(continued on next page)
Removal and Replacement 6-29