user manual

Sensor PCA Removal
1 Remove the Right, Left, Top, and Font Door covers. You need
not remove the MP Tray.
2 Perform the Paper Control PCA removal procedure, as shown
in the preceding section.
3 Disconnect the connectors for SL1, SL2, and M2 from the left
end of the Sensor PCA.
4
Release the (3) clips that hold the Sensor PCA cover. Remove
the cover (see Figure 6-50, callout 1).
5 Remove the Sensor PCA by sliding it to the left and dropping
it down.
Figure 6-50 Sensor PCA Removal
6-60 Removal and Replacement