user manual

Message on LJ 5/5M/5N Recommendations
REMOVE PAPER JAM See 13 PAPER JAM
REQUESTED LANGUAGE NOT AVAILABLE See W2 INVALID PERS
RESETTING ACTIVE I/O See 07 RESET
RESETTING ALL I/O See 07 RESET
RESTORING FACTORY SETTINGS See 08 COLD RESET
TONER LOW See 16 TONER LOW
TRAY 2/3 EMPTY Indicates Tray 2 or 3 has run out of paper
and has not been selected as the current
job’s paper source. If the problem
persists, check for a binding sensor flag
or replace the appropriate sensor.
TRAY x LOAD [paper or envelope size] See xx LOAD [paper or envelope size]
WARMING UP See 02 WARMING UP
x LOAD [envelope size]
x=Tray 1 or Envelope Feeder
See xx LOAD [paper or envelope
size]
LaserJet 5 Error Map 7-C