QuickSpecs HP ProLiant DL160 Generation 5 Overview Hot Plug SAS/SATA and Non-Hot Plug SATA Models Front View: 1. Access panel 2. Quad-Core Intel® Xeon® 5400 series processors (supports up to two) 3. Eight PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800) fully buffered DIMM memory slots 4. Power supply (650 Watts) 5. 6. 7. 8. System fans Optional CD-RW or DVD-ROM drive Two USB ports Power on/off & system LEDs 9. Optional 3rd and 4th 3.
QuickSpecs HP ProLiant DL160 Generation 5 Overview Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache Intel® 5400 Chipset Memory: Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC Internal Drive Support: Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or; Support for up to four 3.
QuickSpecs HP ProLiant DL160 Generation 5 Overview Deployment/Serviceability: Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners.
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-6954ENW.pdf NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information Factory Integrated Models" section. Processor Quad-Core Intel® Xeon® processor X5482 (3.
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Network Controller Expansion Slots # 1 1 2 2 Two embedded NC105i PCIe Gigabit Server Adapters Technology Bus Width PCI-Express 2.0 PCI-X*** x16 Connector Width* x16 Bus Number* 1 64-bit N/A 5 Device No.** Form Factor 0 1 Full length, full height Full length, full height Low Profile Notes 3.3 volts 3.3 volts PCI-Express x16 x16 6 3 3.3 volts 2.0 PCI-X*** 64-bit N/A 5 1 Low Profile 3.
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Interfaces Parallel None Network RJ-45(Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management) Serial 1 Pointing Device (Mouse) 1 Graphics 1 Keyboard 1 USB 5 (two front, one internal, two rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html.
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Core Infrastructure Management HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Disaster Tolerant Solutions HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites Software updates are
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21).
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl160. Rack Support The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only Deployment Service – Hardware Installation only Enhanced Service – Optimize service level to increase IT performance and availability Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage Deployment Service – Installation and Start-up only Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/
QuickSpecs HP ProLiant DL160 Generation 5 HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools.
QuickSpecs HP ProLiant DL160 Generation 5 Models Non-Hot Plug Serial ATA (SATA) Models NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N: 452130-B21) in order to connect a hardware RAID controller. HP DL160 G5 X5472 Processor(s) (1) Quad-Core Intel® Xeon® processor X5472 (3.
QuickSpecs HP ProLiant DL160 Generation 5 Models Country Code Key xx = 00 xx = 20 xx = 29 xx = 37 xx = 42 xx = AA U.S.
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 462465-L21 and one 462465B21. Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 495612-L21 and one 495612B21. Quad-Core Intel® Xeon® processor X5460 (3.
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models Memory Hard Drive Storage Controllers 1 GB FBD PC2-5300 2 X 512 MB Kit 2 GB FBD PC2-5300 2 X 1 GB Kit 4 GB FBD PC2-5300 2 X 2 GB Kit 8 GB FBD PC2-5300 2 X 4 GB Kit Dual Rank 4 GB FBD PC2-6400 800MHz 2 x 2 GB Dual Rank Kit 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit Low Power 2 GB FBD PC2-5300 2 X 1 GB Low Power Kit 4 GB FBD PC2-
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector.
QuickSpecs HP ProLiant DL160 Generation 5 Options Server Management Stand Alone Software Product and ProLiant Essentials NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information.
QuickSpecs HP ProLiant DL160 Generation 5 Options Memory Hard Drives 1 GB FBD PC2-5300 2 X 512 MB Kit 2 GB FBD PC2-5300 2 X 1 GB Kit 4 GB FBD PC2-5300 2 X 2 GB Kit 8 GB FBD PC2-5300 2 X 4 GB Kit Dual Rank 4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit Low Power 2 GB FBD PC2-5300 2 X 1 GB Low Power Kit 4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 8 GB FBD PC2-5300 2 x 4 GB Low Power Kit NOT
QuickSpecs HP ProLiant DL160 Generation 5 Options NOTE: SATA hard drives have a 1-year warranty. Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide) http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) SAS Hot Plug 3.5" Midline (MDL) Drives HP 1TB 7.2K 3.5" DP SAS MDL HDD HP 750GB 7.2K 3.5" DP SAS MDL HDD SAS Hot Plug 3.5" Enterprise (ENT) Drives HP 400GB 3G 10K 3.
QuickSpecs HP ProLiant DL160 Generation 5 Options HP SC44Ge Host Bus Adapter NOTE: PCI-Express SAS HBA. NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.html (8 Internal Port SAS HBA) http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.
QuickSpecs HP ProLiant DL160 Generation 5 Options Communications HPC Specific Options NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html (Smart Array P800 Controller) Riser Board Kits HP PCI-X Riser Board Kit NOTE: Replaces the standard Full Height PCI Express slot with a Full Height PCI-X slot.
QuickSpecs HP ProLiant DL160 Generation 5 Options Tape Drives NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html USB Rack-Mount Tape Drives HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT 160 USB tape drive. SAS Rack-Mount Tape Drives NOTE: HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a dedicated SAS HBA for tape.
QuickSpecs HP ProLiant DL160 Generation 5 Options HP StorageWorks D2D2503i Backup System NOTE: 3TB of Disk Storage. HP StorageWorks D2D4004i Backup System NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12651_div/12651_div.
QuickSpecs HP ProLiant DL160 Generation 5 Options HP StorageWorks 50 Modular Smart Array HP StorageWorks 50 Modular Smart Array NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies and hot plug fans. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.
QuickSpecs HP ProLiant DL160 Generation 5 Options (Worldwide) StorageWorks Options StorageWorks Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.
QuickSpecs HP ProLiant DL160 Generation 5 Options HP Rack 10000 G2 Series (Carbon/Graphite Metallic) 10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet 10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet 10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed.
QuickSpecs HP ProLiant DL160 Generation 5 Options Service and Support Hardware Services 4-Hour On-site Service Offerings 13-Hour x 5-Day Coverage, 3 Years, Electronic (HP Care Pack Services) 24-Hour x 7 Day Coverage, 3 Years, Electronic Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic Hardware Services 6-Hour Call to Repair On-Site Service Hardware Installation, Electronic NOTE: For more information, customer/resellers can contact: http://www.hp.
QuickSpecs HP ProLiant DL160 Generation 5 Memory HP ProLiant DL160 G5 (all models) NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 1GB (2x512MB) or 2GB (2 x 1GB) depending on model, PC2-5300 Fully Buffered DIMM memory, with Advanced ECC. Maximum Memory Up to 32GB memory is available with the optional installation of PC2-5300 Fully Buffered DIMM memory kits. NOTE: Memory should be installed in pairs and matched for optimum performance.
QuickSpecs HP ProLiant DL160 Generation 5 Storage 1-4 A Four Non-hot plug SATA or four 3.5" Hot-plug SAS/SATA hard drive bays Optional DVD-ROM, or DVD/CD RW Drive Support Removable Media DVD-ROM DVD/CD RW Quantity Supported Up to 1 Up to 1 Position Supported A A Controller Integrated IDE (ATAPI) (optional) Integrated IDE (ATAPI) (optional) Hard Drives NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller.
QuickSpecs HP ProLiant DL160 Generation 5 Storage 1TB 3G 7.2K 750 3G 7.2K Quantity Supported Up to 4 Position Supported 1-4 Controller Embedded SATA with integrated SATA RAID 0,1 HP Smart Array E200/128 BBWC Controller HP Smart Array P400 Controller HP Smart Array E500/256MB Controller HP Smart Array P800 Controller SAS Hot Plug 3.5" Enterprise (ENT) Drives NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
QuickSpecs HP ProLiant DL160 Generation 5 Storage Tape and Disk-Based Backup NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide) NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10809.
QuickSpecs HP ProLiant DL160 Generation 5 Storage HP U320e SCSI Host Bus Adapter NOTE: Recommended for MSL tape libraries. External DAT 72x10 Autoloader 1/8 G2 Autoloader MSL2024 MSL4048 HP SC44Ge Host Bus Adapter AH627A HP StorageWorks SAS Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 External 416096-B21 HP StorageWorks Fibre Tape Automation, External MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.hp.
QuickSpecs HP ProLiant DL160 Generation 5 Power Specifications Operational Input 90Vac to 264Vac full range Voltage Range (Vrms) Frequency Range 47 Hz to 63 Hz (Nominal) (Hz) Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max. Rated VA (Volt-Amp) Efficiency (%) Power Factor Leakage Current (mA) Maximum Inrush Current (A peak) Maximum Inrush Current Duration (mS) 100 115 200 220 230 240 653.10 653.19 653.08 652.
QuickSpecs HP ProLiant DL160 Generation 5 System Specifications Power ProLiant DL160 G5 Fully Configured 115V/60Hz 220V/50Hz Fully Loaded System Input Wattage (W) 651 638 Fully Loaded System Input Current (A rms) 5.7 3.0 Fully Loaded System Thermal (BTU- Hr) 2218 2174 Fully Loaded System VA (Volt-Amp) 657 657 System Leakage with all power supplies 1.58 3.
QuickSpecs HP ProLiant DL160 Generation 5 Technical Specifications System Unit Dimensions (H x W x D) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) (with bezel) Weight Maximum 37.00 lb (16.78 kg) (approximate) (all hard drives, power supplies, and processors installed) Minimum 30.00 lb (13.69 kg) (one hard drive, power supply, and processor installed) Input Requirements Rated Line Voltage 90 to 140 VAC (per power supply) 180 to 264 VAC Rated Input Current 7.31A at 115VAC 3.
QuickSpecs HP ProLiant DL160 Generation 5 Technical Specifications Non-operating Acoustic Noise Non-Hot Plug SATA Hard Drives 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
QuickSpecs HP ProLiant DL160 Generation 5 Technical Specifications Embedded NC105i PCIe Network Interface Gigabit Server Adapter Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
