user manual

2. Insert and tighten the three screws.
Figure 2-7 Replacing the metal side cover
To replace the access panel:
1. Place the access panel on the side of the unit, offset about 1/2–inch toward the front of the unit (1).
2. Slide the panel toward the rear of the unit until it locks into place (2).
3. Replace the two screws that secure the access panel to the chassis (3).
Figure 2-8 Replacing the side access panel
External drives
Various external USB drives are available as options for the t5135/t5530. For more information about
these drives, visit
http://www.hp.com/products/thinclientsoftware, or refer to the instructions that
accompany the option.
For more information about available options, visit the HP Web site at
http://h30143.www3.hp.com/
configure2.cfm
14 Chapter 2 Hardware changes ENWW