user manual

6. Simple setup
6.1 Setting the VA-1809's HDMI equipment performance using the internal
program provided at the time of shipment
The performance of the VA-1809 can be changed using the internal program provided at
the time of shipment. Select the number of the program to be set from the ones listed
below, and load the program by following the steps below. To return the VA-1809 to the
factory settings, refer to page ???.
6.1.1 Loading the program
(1) Press the ANALYZE button. The key menu appears as shown below.
--------------------KEY MENU 表示------------------
DETAILS
INC
DEC
DIRECT NUM
F1
F2
F3
F4
(2) Press DIRECT NUM [F4] on the key menu.
--------------------リスト表示------------------
(3) From the list, select the program data to be loaded.
* The cursor is moved using the rotary key, and the selection is entered using
the ENTER key.
* Select the program data based on the performance of the HDMI equipment
from section 6.1.2.
(4) The program is now loaded.
* Program No.??? was loaded at the factory prior to shipment.
17