Upgrade and Service Guide

10 Upgrading and Servicing Guide

d With the inlay near to the door, check that the snap studs (F) on the inlay align

with the holes (G) in the door; adjust the inlay position up or down as needed.

e Slowly press the inlay from top to bottom just to the left of the edge of the

inlay (H) to engage the first column of snap studs.

f Move toward the middle of the inlay, and press the inlay from top to bottom

again, to engage the second column of snap studs (I).

g Move near the left edge of the inlay, and press the inlay from top to bottom

again, to engage the last column of snap studs (J).

d Open the door.

e Insert the inlay screw (B) on the inside of the door.