Upgrade and Service Guide

Upgrading and Servicing Guide 11

3 To close the door, check that the internal covers are in place (see “Replacing the

internal covers” on page 13), and then swing the door toward the front of the chassis

until the latch locks.

4 See “After closing the computer” on page 3.

Removing the internal covers

Complete the following steps to access the components inside the chassis by removing the

internal covers (PCI door, thermal divider, and power supply baffle):

1 Open the access door. See “Accessing the chassis through the access door (left side)”

on page 3.

2 Open the PCI door by moving the latch (K) to the left, and then swinging the door

open. If necessary, lift up the door to remove it from the hinges.