Upgrade and Service Guide

Upgrading and Servicing Guide 13

Replacing the internal covers

1 Replace the power supply baffle by positioning the baffle onto the guide rails

(M1), and then sliding the baffle straight into the chassis.

2 Replace the thermal divider by positioning the divider onto the guide rails (L1),

and then sliding the divider straight into the chassis.

3 Replace the PCI door:

a Hold the door perpendicular (at 90 degrees) to the chassis, with the hinges over

the hinge pins, and then lower the door onto the pins.

b Swing the door closed.

CAUTION: To avoid damaging the PCI door, check that both of the door hinges

are properly seated onto the hinge pins before closing the door.