Upgrade and Service Guide

14 Upgrading and Servicing Guide
Accessing the chassis through the right side
Complete the following steps to access the right side of the chassis to replace the inlay or
the SATA backplane. You must remove the inlay to access the SATA backplane.
1 Loosen the inlay screw (N) from the inside of the chassis.
CAUTION: To avoid damage, when you remove the inlay, protect the inlay by
placing it onto a smooth surface covered by a soft cloth.
NOTE: The inlay screw (N) is a captive screw. Do not remove it from the chassis.
N