Upgrade and Service Guide

20 Upgrading and Servicing Guide
4 To install an inlay:
a To vertically position the inlay with the panel, align the top row of snap studs (Q)
on the inlay with the top row of holes (R) in the panel.
b Lower the inlay onto the panel just to the right of the slots (T), while maintaining
the vertical position.
c Slide the inlay toward the front of the chassis inserting the three tabs (S) on the
inlay into the slots (T) in the panel.
T
R
R
R
S
Q
Q
Q
CAUTION: To avoid damaging the inlay, do not hold or pull out the inlay more
than 2.54 cm (1 inch) away from the panel.