Upgrade and Service Guide

Upgrading and Servicing Guide 21

d With the inlay near to the panel, check that the snap studs (Q) on the inlay align

with the holes (R) in the panel; adjust the inlay position up or down as needed.

e Slowly press the inlay from top to bottom just to the right of the edge of the

inlay (U), to engage the first column of snap studs.

f Move toward the middle of the inlay, and press the inlay from top to bottom again

to engage the second column of snap studs (V).

g Move near the right edge of the inlay and press the inlay from top to bottom again

to engage the last column of snap studs (W).