Upgrade and Service Guide

26 Upgrading and Servicing Guide

6 Remove the primary slim optical disc drive by pulling the drive tab (C) toward the

inside of the chassis, and then rotating it toward you and out of the chassis.

Removing a full-size optical disc drive

1 Prepare the computer to be opened, and then open the left access door. See

“Opening and Closing the Computer” on page 1.

2 Remove the data cable plug and the power cable plug from the back of the optional

full-size optical disc drive. Use a gentle rocking motion to free the power plug; press

the latch on the data plug, and then pull it from the connector.

The following figure shows the location of the back of the full-size optical disc drive

filler (A), which has rails that attach to an optional full-size drive.