Upgrade and Service Guide

Upgrading and Servicing Guide 45

Removing and Replacing the Power Supply

Removing the power supply

1 Prepare the computer to be opened, and then open the left access door, open and

remove the PCI door, remove the thermal divider, and remove the power supply

baffle. See “Opening and Closing the Computer” on page 1.

2 Inside the chassis, note the location of each plug connected to the power supply and

label the cable. Press the latch (A) on each plug, and then pull the plug from the

connector.

WARNING: Remove the power cord from the computer. Failure to do so before

removing the power supply can result in personal injury or equipment

damage.

WARNING: If you disconnect the power connector for the liquid cooling system,

ensure that it is reconnected prior to connecting power and turning on the

computer. Failure to do so may result in damage to the cooling system and to

the computer.