System information

System Board Shield
The system board shield sits above the system board. It is secured with five screws. You must disconnect
several cables that route to the system board to remove the shield.
Figure 6-47 System board location
To remove the system board shield:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer on page 29).
2. Remove the rear cover (see
Rear Cover on page 30).
3.
Disconnect the following cables from the system board:
●
WLAN cable
●
Inverter cable
●
Power button board cable
●
Webcam cable
66 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis