Reference Guide

HP AdvanceStack LanRover/10A Module by Shiva Installation and Reference Guide 7
Self Test
10. Plug the power cord into the power cord receptacle and into an AC power source. Plug the
power cord into the power cord receptacle for each modem. Self test lasts up to 60 seconds.
Check the LEDs:
During self test:
After self-test, the following LEDs are on:
Power ON
Power Supply connected
RPS ON if Redundant
Power ON
Power Supply connected)
RPS ON (if Redundant
Dial-In
Dial-Out (if being used)
Hardware Status