Reference Guide

HP AdvanceStack LanRover/10A Module by Shiva Installation and Reference Guide 15
8-Port Cable Pin-Out Assignments (continued)
Note: Pins 1, 34, 35, and 68 on the SCSI connector connect to ALL pin 7’s on the DB25 ends (e.g.,
“Port 3” and “Port 4” DB25 connectors pins 7 (gnd) connect to SCSI connector pin 1, “Port 5” and
“Port 6” pins 7 connect to 34, etc.)
Regulatory Statements
FCC Class A Statement (for U.S.A. Only):
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference in which case the
user will be required to correct the interference at their own expense.
VCCI Class 1 (For Japan Only)
At SCSI End At DB25 End (“Port 9”) At SCSI End At DB25 End (“Port 10”)
1 (shield) 1 (shield)
52 2 (txd) 60 2 (txd)
53 3 (rxd) 61 3 (rxd)
54 4 (rts) 62 4 (rts)
55 5 (cts) 63 5 (cts)
56 6 (dsr) 64 6 (dsr)
57 8 (dcd) 65 8 (dcd)
58 20 (dtr) 66 20 (dtr)
59 22 (ri) 67 22 (ri)
68 7 (gnd) 68 7 (gnd)