Reference Guide

HP AdvanceStack LanRover/10A Module by Shiva Installation and Reference Guide 1
HP AdvanceStack LanRover/10A Module by Shiva
Installation and Reference Guide
The HP J3230A AdvanceStack LanRover/10A Module by Shiva is a module that can be inserted into
the following products:
■ HP AdvanceStack Switching Hub-12R, 24R, and 24T
■ HP AdvanceStack Remote 2C
■ HP AdvanceStack Switch 208 and 224
The features of the HP J3230A AdvanceStack LanRover/10A Module by Shiva are:
■ Ten asynchronous ports (RS-232, RS-423, to 112 Kbps)
■ Quick Setup Wizard for only a 15-minute configuration of the LanRover/10A by Shiva
■ Single-user, multiprotocol, dial-in remote access for PCs running DOS, Windows,
Windows 95, and Windows NT (TCP/IP, IPX, NetBEUI, 802.2/LLC protocols); Macintosh
computers (AppleTalk and TCP/IP protocols); and UNIX computers (TCP/IP and SLIP
protocols)
■ Shared dial-out (modem pooling) for PCs running DOS, Windows, and Windows 95 (TCP/IP
and IPX protocols)
■ Support for external terminal adapters with analog interface allows the use of an ISDN line
as supported by the external terminal adapter
■ Support for Microsoft IPCP extensions for automatic name server configuration (DNS
address, WINS address) of IP stacks, Microsoft TCP/IP-32 and FTP PC/TCP & OnNet
■ Support for dial-in channel aggregation over internal ISDN adapters (IBM WaveRunner and
ISDN*tek) using Multilink Protocol and external ISDN terminal adapters
■ LAN to LAN routing for IP and IPX protocols
■ Connection features, including:
• Idle detect
• Persistency