Reference Guide

Managing the Hub Cables
The HP AdvanceStack hubs have been designed to help you manage your
network cables. On the right side of each hub is a built-in cable management
bar.
The bars have slots in them that you can use for tie-wrapping the network
cables.
Additionally, included in the hub’s accessory kit are some specialized
tie-wraps that allow you to wrap the cables and then attach the bundle to the
cable management bar, as shown in the illustration below.
In some instances, all the cables will not fit inside the post on the cable
management bar. The specialized tie-wrap can be used to bundle the extra
cables and hang them on the outside of the post.
cable management bar
specialized tie-wrap
Installing the
HP AdvanceStack Hub
Installing the HP AdvanceStack Hub
1-20